Ashtray
Scout1067
Old Time Jeeper
I saw an thread on here the other day about ashtrays and how hard they are to get ahold of if you want to keep your CJ authentic. I cleaned mine up shortly after I got it and decided to post some pics.
Mine was pretty rusty and the paint was scratched so I took it off and treated the mounting bracket with some rust removal stuff, lubed up the bearings, and repainted the front of the ashtray with some flat black spray paint. I used white lithium grease on the bearings because white lithium is my go to grease since the can of moly grease I "acquired" in the army was finally emptied last year.
The rust remover stuff I got from my local hardware store and it works much better than I thought it would although I did have to treat it twice. The rat's nest of wires behind the ashtray is leftover from something the PO did and that will get fixed next spring when I plan on rewiring the entire jeep with a new wiring harness.
Mine was pretty rusty and the paint was scratched so I took it off and treated the mounting bracket with some rust removal stuff, lubed up the bearings, and repainted the front of the ashtray with some flat black spray paint. I used white lithium grease on the bearings because white lithium is my go to grease since the can of moly grease I "acquired" in the army was finally emptied last year.
The rust remover stuff I got from my local hardware store and it works much better than I thought it would although I did have to treat it twice. The rat's nest of wires behind the ashtray is leftover from something the PO did and that will get fixed next spring when I plan on rewiring the entire jeep with a new wiring harness.
Attachments
Last edited:
