Camber Adjustment
-
To celebrate the 4th of July, starting today (07/01/2025) all User Upgrades will be reduced by 10% (thru 07/08/2025) To use this special coupon use the code 2025-4th-10percent at check out. If you are already a supporter your existing package will be extended.
Thank you for your support!
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Camber Adjustment
- Thread starter IowaCJ5
- Start date Start date:
- Last post Last post:
csuengr
Senior Jeeper
- Posts
- 767
- Thanks
- 0
- Location
- Loveland, CO
- Vehicle(s)
- 1980 CJ-7 LT1 TF727 NP231-D300 Waggy D44's ARB's 35" tires
It is impossible to change the camber changing the suspension. The camber is built in to the axle. Do you mean caster?
Jimbos76cj
Full Time Jeeper
- Posts
- 2,223
- Thanks
- 1
- Location
- St.Cloud FL
- Vehicle(s)
- 83 CJ-7.. 4" YJ springs front rear, J-10 44 front/AMC 20 rear,6 cy auto dana 300 35' bfg Done and gone!!
Ask me about my head light upgrade harness!!!
camber can be adjusted slightly with special inserts that go into your knuckles but more then likely you did not affect it with the new suspension. Caster on the other hand is almost always changed when leaf springs are changed and longer shackles are used. To adjust your angle you have 3 options..
1 buy a set of steel degree shims
2 cut your spring mounts and turn your axle to where its correct then reweld them on
3 cut your knuckles free of the tube and turn em to the correct angle..
it would really help to know how you changed your suspension.
1 buy a set of steel degree shims
2 cut your spring mounts and turn your axle to where its correct then reweld them on
3 cut your knuckles free of the tube and turn em to the correct angle..
it would really help to know how you changed your suspension.