• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

CJ-5 chassis

CJ-5 chassis

firemanbk

Jeeper
Posts
1
Thanks
0
Location
Kimberly, WI
Vehicle(s)
'74 CJ5, 350, Muncie 465, NP205, D30,D44
I am looking for measurements/ chassis specs for a 1974 CJ5 , I have a bare frame with nothing mounted, ie body mounts. any help would be great
 
That link took to a late CJ5 frame. I'm looking for the same info basically. I have a 74 with the back section rusted out ... 72 to 75 were the transition years their kept the narrow frame but the hood and fenders were elongated to make room for the I6 engine. I am trying to find out if the frame was also stretched. I have a lead on a good frame from (best guess because of the rear offset differential) late 50's
 
The frame was definitely made longer w/longer wheel base.However the rear section is the same as earlier CJ5 . The later ,1972-75, tub will fit on early frame. The rear section of the frame has some changes for rear mounted fuel tank,etc. mike
 
This is what your looking for.....
 
If your frame is really toast, you might want to try something like this:

pics-your-custom-frame-builds-dscn0180_zpshgkpteio.webp
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$25.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  12.5%
Back
Top Bottom