Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
To celebrate the 4th of July, starting today (07/01/2025) all User Upgrades will be reduced by 10% (thru 07/08/2025) To use this special coupon use the code 2025-4th-10percent at check out. If you are already a supporter your existing package will be extended. Thank you for your support!
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
I tried that park it... it will not break.....
The E brake kept poping up, I push with foot and would go back down and few seconds later it poped back up. Kinda like a little kid NO I want to go!
I recut the teeth 2-3 times and better but would still pop. Got one from local jeeper that had some nice parts... works great now.
I guess replace and upgrade till its new... is the only path to reliability. The CJs are 33 yr old or so.
AMC 258 i6 / 4.2l , stock T-18 , stock axles with big brake packages front/rear, power bakes / steering, tilt wheel. Thats pretty decked out for CJ equipment... all stock and the hard top too....Added: Borla Header, jeep alum intake, Weber, MSD Ignition, TeamRush Upgrade & Fixes. Jeep Dana 44 Axle going in the rear.
So Far more work fixing than hours wheeling. The nice spots to wheel here need 1-2 lockers. So to make it need to horse / force more than I would like to ... but it made it.
I have driven 4 hrs into Iowa then back with a trailer and not a single hick up.
Drove 5 hrs up north, wheeled at Gilbert 4 days all day, 5 hrs back work flawless. A friend in his 4 cy fuel injected jeep use 1 less gallon than I did on the way up. He was impressed a 30 yr old CJ could work well and not break.
I did collasp my rusty spring perches on the back AMC20 axle some. I guess even the AMC 258 i6 / 4.2l can put some torque out back there. Will be replaced with the Dana 44 new perches in a few wks.
This summer will take a trip out west central US or to east coast and maybe second trip to U P MI. These are 1000 mile trips one way.... so I guess I trust my set up. When I purchased my CJ from Sioux Falls SD it ran out of gas twice on trip to Twin Cities.... that was 8-9 mpg. It now get 23/24 mpg hwy if I am careful with the skinny pedal and drive like the vac gauge is hooked up.
I drove a 1973 Jeep Truck for 5 years or so. Never broke... great truck. I bent the tie rod when stock in ditch once... other than that never broke and never stranded me. So new it could be done... it got 23 mpg hwy
Rescue... I have a 3.54 AMC20 , new moser axles, new bearings & seals, new brake drums and shoes. I was going to use and purchased complete. I am going with 3.73 gears so its for sale..... would like to get $ the axles are $250, brake parts $100. So for all at $ good deal. New parts... there is no rust , dirt, or discoloration on the brakes parts or moser axle flanges exposed.
85 CJ7
258 engine
T5 Transmission
Dana 300 T Case
Model 20 Rear
Dana 30 Front
4" lift
33" tires,
2000 Jeep Cherokee XJ
4.0 Engine
AW4 Transmission
NP 231 T Case
8.25 Rear
Dana 30 Front
2" lift
30" Tires
1996 Cherokee ex-forest service
6.5" lift
33" tires
locker
As a late old friend of mine put it "breaking down and busting parts is all part of the jeep experience". Hence the saying time and time again "JEEP stands for Just Empty Every Pocket. I wouldn't have it any other way.:grinjeep:
67 cj5,225 Dauntless, D30,chrome molies, detroit, D44, full floating detroit, custom steering, disc all the way around,2 inch lift on 31s, armored up
70 cj6 4 inch lift
73 CJ5 4.0 head on a 258, HEI, Holley Projection w/ 4.56, Detroit lockers Narrowed D44 front and full float D44 rear T14 w/ D20 4 wheel discs, 38.5 Boggers
83 CJ7 350 tbi, TH350, D300 twin sticked & clocked, narrowed Chief D44 Eaton Elocker & Moser shafts, Explorer 8.8 Detroit locker, 410's, RE 4.5" spring lift 1" body lift, 35" Claws, cage tied to frame, Corbeau baja seats, HD tie rod and draglink, u-bolts flipped, custom skid plate and sliders, Warn 9.5ti winch with Amsteel synthetic line