• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

Misc. Don't Laugh - Need help sourcing a wheel

Misc. Don't Laugh - Need help sourcing a wheel
Posts
6
Thanks
2
Location
Rapid City
Vehicle(s)
1977 CJ7, 304, 3spd, 2.5 BDS, nonfunctional gas gauge
That's clean. I'm by no means a wheel expert but I'm sure one of these fine folks will chime in

Sent from my E7110 using Tapatalk
 
Register now
You must register or login to view hidden content on this page.
Thanks for the responses so far. The style is easy to match but the backspacing and different lip depths are the killers. I ordered an Outlaw II with -19 offset and the backspacing was 3.75" instead of the 3.25" on my existing wheels. All other new wheels I have seen are almost identical offset with almost identical lip depths.
Thanks so far - keep the tips coming! Or let me know your price if you have such a wheel you could part with.
Thanks!
 
The Pacer 162 has a -6 offset (less than the -19 of the Outlaw II). I don't know on these wheels how much the offset (in mm) affects the backspacing (in inches). I do know that your experience showed about 1/2" of backspacing difference between what you have (3.25") and the Outlaw II (3.75"). The 13mm difference between the -6 of the Pacer 162 and the Outlaw II's -19 is 13mm, which is 1/2".
 
Register now
You must register or login to view hidden content on this page.

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$60.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  30.0%
Back
Top Bottom