• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

Hoist on a jeep?

Hoist on a jeep?

rr41mag

Full Time Jeeper
Posts
2,015
Thanks
1
Location
Panama city florida
Vehicle(s)
04 dodge truck, 1966 chevy truck, 2012 rav4
And finally a 1981 jeep cj7 258 hardtop
Anyone else ever rigged up something to use their wich to pick up something heavy. I'm getting ready to move and have a couple motors and a vice about as big as a motor that I need to get out of my garage onto the driveway.
 
I've seen it done. They used the shackle mounts on the front bumper to mount a gin pole setup, and tied it to the roll bar for support. then ran the winch cable over the gin poles to lift stuff up.
 
 
Rent an engine hoist, cheaper, easier, safer.:D
 
An engine hoist won't do all the things a gin pole set on a Jeep will do, tho! Ever try rolling a loaded engine hoist over soft...anything? LOL
Heres a good one for ya!
attachment.webp

Not a Jeep, but close...
100_1158.webp

another...
attachment.webp


I set this up on my trailer a few years ago, and it has more than paid for itself over the years, and saved my back many many times over as well...
56be57c6.webp
 
I can't pick the motors up with my engine hoist and roll it from my garage to the drive. There is grass between the two. I have my engine hoist on the driveway now so I can load all this heavy stuff into the trailer.
 
I saw this setup in a field while looking at the orange one next to it. He has some weight in the back to help out. The old timer said it never let him down.

Spike

uploadfromtaptalk1337322074745.webp
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$0.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  0.0%
Back
Top Bottom