• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

Little Black Box??

Little Black Box??

bntcrkfrm

Jeeper
Posts
34
Thanks
0
Location
Georgia
Register now
You must register or login to view hidden content on this page.
In the engine compartment mounted on the drivers side Fender well under the Brake Master Cylinder is a black box about 4" x 6" with some electrical wires come from the bottom of it. What is it and what purpose does it serve? Mine has what appears to have been some overheating and some plastic melted on the fenderwell.....
 
In the engine compartment mounted on the drivers side Fender well under the Brake Master Cylinder is a black box about 4" x 6" with some electrical wires come from the bottom of it. What is it and what purpose does it serve? Mine has what appears to have been some overheating and some plastic melted on the fenderwell.....

Fill out your profile so we know what cj you have.
 
Register now
You must register or login to view hidden content on this page.
Sorry about that...It is a 1980 CJ5 ...I cant seem to figure out how to attach a pic from my folder. It says Motorcraft on the box #12A199
 
Last edited:
Searched the Motorcraft #12A199 and turns out it is an Ignition Module. What does it do and why would it be leaking what looks to be melted plastic. Nothing is wrong, Jeep starts and runs fine, no hot wiring smells.
 
BusaDave, Those are the steps I follow to post pics but when I click to upload it comes back as invalid file. There's something not right when saving pics to "My Pictures" folder. I can see the pics but sometimes they will transfer, sometimes they wont. Thanks
 
this box has never been hooked up and its ran before.
The ignition module is needed on a stock engine but there are ways to get rid of it. Do you have an MSD or other aftermarket ignition module? Did a PO install a points distributor?
 
The ignition module is needed on a stock engine but there are ways to get rid of it. Do you have an MSD or other aftermarket ignition module? Did a PO install a points distributor?

I haven't seen anything else and I don't believe it's a points distributor
 
What size are they? they might be to big.
And you still haven't filled out your profile :confused:
 
I haven't seen anything else and I don't believe it's a points distributor
There must be something making your engine run.
Trace the minus wire from the coil. That wire must go either to points or to some type of ignition module.
 
There must be something making your engine run.
Trace the minus wire from the coil. That wire must go either to points or to some type of ignition module.

Will do on Friday or Saturday. This jeep is many firsts for me and I think it ran off of pfm (pure f*cking magic)
 
Register now
You must register or login to view hidden content on this page.

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$0.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  0.0%
Back
Top Bottom