More Mc2100 confusion
Looks to be some good info but it wont load for me? It has the 4.0 head swap thread and the TFI ignition thread I wanna check out as well.
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.To dismiss this noticeclick the top right X.
More Mc2100 confusion
- Thread starter Petescj
- Start date Start date:
- Last post Last post:
Looks to be some good info but it wont load for me? It has the 4.0 head swap thread and the TFI ignition thread I wanna check out as well.
On a happy note I swapped the new (rebuilt) carb back on today and it ran like 
again. 
I finally turned the mixture screws a bit in unison and I have it running smooth baby!!! Turn the key without pumping the gas smooth!! 
I tried again 1/2 hr. later with the same results. The real test will be tomorrow morning.
I still have the magic valve hooked up. I cleaned the top of it and took a pic. I'll try and look it up later. If I can dump it after all this I will. For now it stays in the line up.
I think Im running rich , but after smelling gas in the garage for a good 2 hrs. :wasted: I'll post judgement on that tomorrow.
again. I finally turned the mixture screws a bit in unison and I have it running smooth baby!!! Turn the key without pumping the gas smooth!! I tried again 1/2 hr. later with the same results. The real test will be tomorrow morning.I still have the magic valve hooked up. I cleaned the top of it and took a pic. I'll try and look it up later. If I can dump it after all this I will. For now it stays in the line up.
I think Im running rich , but after smelling gas in the garage for a good 2 hrs. :wasted: I'll post judgement on that tomorrow.