Mounting 3-point seat belts

[jonboy1919]

I've got a '79 CJ7 with just lap belts in front, would like to swap for 3-point belts. I've got a full rollbar cage under a hardtop. Anybody else converted to a 3-point belt system? If so, where and how did you mount the upper point of the belts?

 

[gillmore]

This is on my list of projects too. My plan is to weld a threaded bung into the roll bar. See Summit Machine Seat Belt Bungs | Summit Machine or Machined Steel Seatbelt Bungs | Jeep Roll Bar | Jeep Roll Cage | Poison Spyder Customs

 

[jonboy1919]

Gillmore,

Thanks alot, perfect to do the job. Jonboy1919

 

[73CJ]

Nice. Kind of spendy. Looks like it time tofire up the lathe.

Thanks

 

[ken98k]

Nice. Kind of spendy. Looks like it time tofire up the lathe.

Thanks

What do you have for a lathe?

 

[73CJ]

A 9x20 Engine lathe.

Great for making bushings, body lifts, swaybar links and spacers.

 

[GPER]

I used the RSJ 2 inch Y shoulder harness and lap belts in my 79 CJ7 . They wrap the strap around the roll bar then a buckle is used to fasten the strap. I have had mine for years and have them in my Polaris Ranger 6x6 also. I did weld a retaining strap to the back side of the roll bar to keep them from sliding side to side. You can kind of see them in this pic of the Ranger.