New wiring harness

[Horne]

I'm installing a "new" painless 10110 harness in my CJ7 . While all 3 harness sections are complete, I am missing the "Small parts kit". Does anyone know where to get the harness retaining rings that hold the headlight harness to the drivers side inner fender? To the fire wall too?

 

[Torxhead]

I would suggest contacting the manufacturer on that, refer to their customer service.

 

[Posi]

Do a G search for "Wire Loom Routing Clip Split Wire Harness Conduit"

 

[Horne]

Thanks!!

 

[gert]

in the past I have found some of those in the "help me" section at my local parts store

 

[Horne]

Found 'em. Thanks!

 

[Horne]

Ok guys, Where do I find information as to what hardware was used by the factory? I'm building this thing from scratch, and am finding that when I buy parts, they dont come with hardware. Specificaly mounting screws. Side marker lights, headlight buckets etc. HELP!

 

[gert]

Ok guys, Where do I find information as to what hardware was used by the factory? I'm building this thing from scratch, and am finding that when I buy parts, they dont come with hardware. Specificaly mounting screws. Side marker lights, headlight buckets etc. HELP!

these kits will be way easier and wont rust like the oem steel:

also Morris 4x4 is a great company to shop from


Totally Stainless Body Bolt Kit - Indented Hex Head (Original) 634 Pieces - TS-62484

Totally Stainless Body Bolt Kit - (Hex Head 634 Pieces) - TS-62483

Totally Stainless Body Bolt Kit - Button Head 634 Pieces - TS-62482

 

[Horne]

Thanks for the help so far. Next question. I'm installing a new wiper motor and a "wipe boy" wiper kit. It is a 4 wire motor with a flat connector. Is it suposed to plug into the switch? is there a different switch for 3 wire motor vs. 4 wire motor?

 

[gert]

Thanks for the help so far. Next question. I'm installing a new wiper motor and a "wipe boy" wiper kit. It is a 4 wire motor with a flat connector. Is it suposed to plug into the switch? is there a different switch for 3 wire motor vs. 4 wire motor?

Been along time since I looked at mine, I will look at it when I get home I think mine is a4 wire and I had to keep the wiper wire harness with my new painless harness


Sent from my iPhone using Tapatalk

 

[gert]

Looks like the 4 wire plug goes to a plug just off the wiper switch which has2 extra wires going to it 1 of mine is labeled windshield washer


Sent from my iPhone using Tapatalk

 

[gert]

pay no attention to the wire splices they go to the tach


Sent from my iPhone using Tapatalk

 

[Horne]

Thanks for the photo! that helps a lot!