Replacing this joint

[Vikingone]

So I’ve been tinkering around on little things as the budget is tight with a baby on the way. Cleaning, priming and painting the steering shafts. Well I checked and found this joint moving freely in one direction but not the other. Sprayed her down with penetrating fluid but still super tight. Can’t seem to find a replacement joint. Is a whole new shaft the only way to go?


Sent from my iPhone using Tapatalk

 

[huntnCJfool]

So I’ve been tinkering around on little things as the budget is tight with a baby on the way. Cleaning, priming and painting the steering shafts. Well I checked and found this joint moving freely in one direction but not the other. Sprayed her down with penetrating fluid but still super tight. Can’t seem to find a replacement joint. Is a whole new shaft the only way to go?


Sent from my iPhone using Tapatalk

Whole shaft has to be replaced. There are Crown, Omix, and then some beefier ones.

 

[Vikingone]

Thanks. Had a feeling that was gonna be the answer.


Sent from my iPhone using Tapatalk

 

[Lumpy Grits]

Whole shaft has to be replaced. There are Crown, Omix, and then some beefier ones.

Stay the hell away from Crown, Omix etc-China junk.
Look hard at these......
https://www.borgeson.com/xcart/home.php?cat=112&page=1
LG

 

[mtnwhlr]

Stay the hell away from Crown, Omix etc-China junk.
Look hard at these......
https://www.borgeson.com/xcart/home.php?cat=112&page=1
LG

X2 don't waste your money on the China .