rubbing

[cj7 arlington tn]

i have 2 and half inch lift with 285 tires. i am thinking of doing a SOA lift and running 35 or 36 inch tires. the question is will the 20 and 30 hold up to those tires and will the motor and Transmission be enough. i will be doing moderate off roading and driving around the street any suggestions

 

[Old Dog]

The 20 with 1 piece axles and the 30 will hold up IF your easy on the skinny peddle.
35's will rub if you don't do some body trimming (you need to open the wheelwells up to tj flair size)
You will also need 4:56 or 4:88 gears with 35's

 

[cj7 arlington tn]

how do i tell if i have one or two piece axles

You must login or register to view hidden content on this page.

 

[Cheepjeep85]

Pull the wheel and hub cap off if there is a shaft coming out of the center of the drum with a crown nut and cotter pin on it then you have 2pc axles, if its smooth somebody put a 1pc kit in it.

Droooiiddd 2

You must login or register to view hidden content on this page.

 

[cj7 arlington tn]

ok thanks i will do that

You must login or register to view hidden content on this page.