Soft Top Repair
WHATROAD
Senior Jeeper
- Posts
- 762
- Media
- 18
- Thanks
- 104
- Location
- Colorado Springs
- Vehicle(s)
- 1984 cj7 RENEGADE, Hard Top, factory air, reman 304 v8, ax15, D 300, D 30, AMC 20 with one piece axle, welded tubes and a searchers truss system, 4.56 gears, 4" lift, BFG 33x12.5x15, DirtWorx front and rear bumpers, rock sliders
Wheelin with the top down and I thought secured, I bounced through a couple of washouts and switch backs all in the name of weekend fun. Putting the top back up for the work week, I noticed two small knife point size tears in the top. Not secured down as well as I thought it must have jammed up against something sharp. Still small but potential for down the road big money.
Unable to find much in the way of help for this issue I turn to you all for some ideas.
I have read such remedies as crazy glue, tire patch kits, and g600 glue with a piece of top material as a patch. The cuts are very small but an issue for me. should I be concerned at this point or just bag it until they become more of an issue?
Thanks to all in advance!
Unable to find much in the way of help for this issue I turn to you all for some ideas.
I have read such remedies as crazy glue, tire patch kits, and g600 glue with a piece of top material as a patch. The cuts are very small but an issue for me. should I be concerned at this point or just bag it until they become more of an issue?
Thanks to all in advance!