Interior Steering wheel Allen Heads

[KRUPP]

Been searching for the little plastic “Allen Heads” that go on the steering wheel horn button. Other than the $200 o.e.m. horn buttons on EBay, is there another source out there?
Suppose I could always buy some Allen head bolts and make ‘em fit. But, thought I’d float the question here first.

 

[CJ]

If I remember I found some on fastenal.com , not direct but worked.

 

[Belizean]

I got the whole works and shipping for some less than that. I specially ask for one that the black grip was in poor shape since it was getting reworked.

 

[KRUPP]

Thanks for the suggestions, fellas.
I’ll let you know what I find.

 

[Rickster]

It has been over 11 years since I rebuilt my CJ7 , but I had the same issue that you have. I found that the steel socket head screw was almost identical to the OEM plastic screw and used it. My son has my CJ at his house or else I would have sent you a picture. This is not the exact kit that I used, only included it as an example (you can get just the single screw that you need).

Amazon.com

 

[KRUPP]

After some more searching, I ended up using 5/16” Socket Cap screws (Allen Heads) that I found matched almost perfectly. Dug through several stores’ hardware bins.
Had to cut them down to about 1/4” of thread left. Also, removed the hard plastic plate which snaps onto the horn cup and gently drilled and tapped it’s existing holes to accept the new 5/16” screws. Original plastic screws are only about 1/8” dia.
Turned out nice for a morning’s chore.