Misc Suspension issue?

[Tommydp]

Hello,
I mentioned in my last message I recently purchased a 95 yj. It had 2-1/2” suspension lift and bushings etc were worn out so I put a new rough country 2-1/2” lift with new shocks.
It was leaning to passenger side 1/2”-5/8” before lift change and after new suspension it still has the same amount of lean. Any ideas why?

 

[jzak]

Maybe the body mounts are shot. The rubber mounts can crack and collapse overtime.

 

[Tommydp]

Thanks, I will check it out and let you know what I find

 

[Belizean]

Do you have a front sway bar ? I know when mine is disconnected mine looks like it’s lower on the passenger side as I’m driving down the road. I need to measure it when connected and disconnected.

 

[KRUPP]

Check the distances between shackle hanger and spring hanger on front and rear. Left and right should be the same measurement.
Could have some differences though as a result of a crash/bad Chrysler quality/modification/etc.
I’ve also seen differences in aftermarket spring lengths too, which will also cause the lean.

 

[Tommydp]

Thanks for the input