T19 w/6.32 1st

[hole]

Stock 3.54, as long as that's an "N" stamped on my rear axle not an "M".

What size tire? I'm planning on re-gearing in the future and want no part of 3k rpm at 60mph. Right now with stock 2:73,s and 32" tires I'm turning 17-1800 at 60 ish. Fine on flat ground but a dog on hills

 

[Lumpy Grits]

You want your rpms about 2300-2400 at freeway speed with a AMC 258 i6 / 4.2l .
With your 32's. I'll say 3:54 would be a good choice.
This is a handy chart to use.
https://www.ringpinion.com/calculators/Calc_RPM.aspx

LG

 

[elwood blues]

What size tire? I'm planning on re-gearing in the future and want no part of 3k rpm at 60mph. Right now with stock 2:73,s and 32" tires I'm turning 17-1800 at 60 ish. Fine on flat ground but a dog on hills

30x9.5x15 BFG M/Ts

Between the 1:1 4th gear of the T-18 and the 3.54s in the axles 55mph down the road is at about 2800rpms. To push it to 65mph is easily 3200rpms.

 

[hole]

Since there's no plan to ever go beyond 33's, 3.54's seem like a good choice for my situation. Thank you Elwood and Lumpy, sorry OP that this has gone a bit sideways. My offer still stands if you want to send that T19 my way

 

[hbwc1984]

Hey guys thank you for your input.. I can see this deep 1st gear would be a mistake in my case. I would consider selling it but It's a heavy beast and truck shipping would be expensive. If any of you are interested and have some transportation means, I'd take $450 for it.

 

[JR74CJ5]

Hey guys thank you for your input.. I can see this deep 1st gear would be a mistake in my case. I would consider selling it but It's a heavy beast and truck shipping would be expensive. If any of you are interested and have some transportation means, I'd take $450 for it.

Let's move that to private messages or the classifieds section

Selling on open forum is against the rules... No harm no foul at this point, just FYI.


~ Jr