Very tight fit
Kane
Full Time Jeeper
- Posts
- 2,796
- Media
- 2
- Thanks
- 1
- Location
- Berlin, CT
- Vehicle(s)
- 1984 CJ-8 Restomod Scout axles 4 wheel disks, 258, ax15, D300.
I bought a prefab garage (14'x24') to store my CJ5 , dirt bikes, parts and what ever else I need. The CJ5 was put outside to make room for my CJ8 restoration and I wasn't too happy about that. So the one I bought I found at a fair. The sales guy told me how it has a full size garage door for automobiles and I knew that they made a quality product. I have one of their smaller sheds in my back yard. It was deliverd last week and this Sunday I finally had time to go and load her up with my toys. I noticed the garage door was slightly lower than the one in my house is that raised concern since my CJ is lifted. Well, after some measuring I realized that I had to remove the soft top to try and fit her inside. Plus I didn't want to risk tearing the top up the first time in. After getting the Jeep in it looks like I am going to have to raise the whole garage door up a few inches and then make some sort of removable riser plate on the floor to seal the bottom when the door and fully down. Man it is a tight fit. The bottom handle had to be removed the clear the rollbar.
Here are the pics.
Here are the pics.