Frame 1986 CJ 7 Frame
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.To dismiss this noticeclick the top right X.
Manic Mechanic
Full Time Jeeper
- Posts
- 1,880
- Media
- 34
- Solutions
- 10
- Thanks
- 499
- Location
- Thurmont MD
- Vehicle(s)
- 85 CJ7 4.2L 258 .040 over, T-5 trans, dana 300, dana 30 front 3.23 and lock right locker, rear amc 20 3.23 one piece axle shafts traclock
79 CJ7 304, th400 auto borgwarner 1389?? qudratrac stock rest unknown.
89 YJ 4.2L 258, AX-15 5spd, NP231, dana 30 front, dana 35 rear with posi, gears unknown
92 YJ 4.0, AX-15 5spd, np231, dana 30 front, dana 35 rear.
Not the best looking welds but not the worst either.
Better than rust at any rate. Also check for rust on the inside (the section near the motor and Transmission ) by the brake proportioning valve as it rots there as well.
Sent from my E7110 using Tapatalk
Better than rust at any rate. Also check for rust on the inside (the section near the motor and Transmission ) by the brake proportioning valve as it rots there as well.
Sent from my E7110 using Tapatalk
Thanks for the response. Will do. Jeep is $4000 and needs a little bodywork in the normal areas, ie rockers and rear quarters. Drive train is said be very good for the age of the jeep. 87,000 original miles. Feel like it’s worth the 2.5hr drive to for that price.
Manic Mechanic
Full Time Jeeper
- Posts
- 1,880
- Media
- 34
- Solutions
- 10
- Thanks
- 499
- Location
- Thurmont MD
- Vehicle(s)
- 85 CJ7 4.2L 258 .040 over, T-5 trans, dana 300, dana 30 front 3.23 and lock right locker, rear amc 20 3.23 one piece axle shafts traclock
79 CJ7 304, th400 auto borgwarner 1389?? qudratrac stock rest unknown.
89 YJ 4.2L 258, AX-15 5spd, NP231, dana 30 front, dana 35 rear with posi, gears unknown
92 YJ 4.0, AX-15 5spd, np231, dana 30 front, dana 35 rear.
What motor and Transmission ? 86 is the last year and some of them had a vary hard to find wide track Dana 44 rear axle
Do you have more pictures?
Sent from my E7110 using Tapatalk
Do you have more pictures?
Sent from my E7110 using Tapatalk
Manic Mechanic
Full Time Jeeper
- Posts
- 1,880
- Media
- 34
- Solutions
- 10
- Thanks
- 499
- Location
- Thurmont MD
- Vehicle(s)
- 85 CJ7 4.2L 258 .040 over, T-5 trans, dana 300, dana 30 front 3.23 and lock right locker, rear amc 20 3.23 one piece axle shafts traclock
79 CJ7 304, th400 auto borgwarner 1389?? qudratrac stock rest unknown.
89 YJ 4.2L 258, AX-15 5spd, NP231, dana 30 front, dana 35 rear with posi, gears unknown
92 YJ 4.0, AX-15 5spd, np231, dana 30 front, dana 35 rear.
Depends on how bad the rust was to begin with. Or if they were just reinforcing the frame in that area for a aftermarket bumper
With the combo you mentioned and if the Jeep is in at least decent working order then 4k is a good deal
Sent from my E7110 using Tapatalk
With the combo you mentioned and if the Jeep is in at least decent working order then 4k is a good deal
Sent from my E7110 using Tapatalk
Manic Mechanic
Full Time Jeeper
- Posts
- 1,880
- Media
- 34
- Solutions
- 10
- Thanks
- 499
- Location
- Thurmont MD
- Vehicle(s)
- 85 CJ7 4.2L 258 .040 over, T-5 trans, dana 300, dana 30 front 3.23 and lock right locker, rear amc 20 3.23 one piece axle shafts traclock
79 CJ7 304, th400 auto borgwarner 1389?? qudratrac stock rest unknown.
89 YJ 4.2L 258, AX-15 5spd, NP231, dana 30 front, dana 35 rear with posi, gears unknown
92 YJ 4.0, AX-15 5spd, np231, dana 30 front, dana 35 rear.
Post pics
Sent from my E7110 using Tapatalk
Sent from my E7110 using Tapatalk
Manic Mechanic
Full Time Jeeper
- Posts
- 1,880
- Media
- 34
- Solutions
- 10
- Thanks
- 499
- Location
- Thurmont MD
- Vehicle(s)
- 85 CJ7 4.2L 258 .040 over, T-5 trans, dana 300, dana 30 front 3.23 and lock right locker, rear amc 20 3.23 one piece axle shafts traclock
79 CJ7 304, th400 auto borgwarner 1389?? qudratrac stock rest unknown.
89 YJ 4.2L 258, AX-15 5spd, NP231, dana 30 front, dana 35 rear with posi, gears unknown
92 YJ 4.0, AX-15 5spd, np231, dana 30 front, dana 35 rear.
She's clean. Definitely a good deal
Sent from my E7110 using Tapatalk
Sent from my E7110 using Tapatalk
Manic Mechanic
Full Time Jeeper
- Posts
- 1,880
- Media
- 34
- Solutions
- 10
- Thanks
- 499
- Location
- Thurmont MD
- Vehicle(s)
- 85 CJ7 4.2L 258 .040 over, T-5 trans, dana 300, dana 30 front 3.23 and lock right locker, rear amc 20 3.23 one piece axle shafts traclock
79 CJ7 304, th400 auto borgwarner 1389?? qudratrac stock rest unknown.
89 YJ 4.2L 258, AX-15 5spd, NP231, dana 30 front, dana 35 rear with posi, gears unknown
92 YJ 4.0, AX-15 5spd, np231, dana 30 front, dana 35 rear.
Deal keeps getting better and better
Sent from my E7110 using Tapatalk
Sent from my E7110 using Tapatalk
Scary Gary
Jeeper
Scary Gary
Jeeper
Manic Mechanic
Full Time Jeeper
- Posts
- 1,880
- Media
- 34
- Solutions
- 10
- Thanks
- 499
- Location
- Thurmont MD
- Vehicle(s)
- 85 CJ7 4.2L 258 .040 over, T-5 trans, dana 300, dana 30 front 3.23 and lock right locker, rear amc 20 3.23 one piece axle shafts traclock
79 CJ7 304, th400 auto borgwarner 1389?? qudratrac stock rest unknown.
89 YJ 4.2L 258, AX-15 5spd, NP231, dana 30 front, dana 35 rear with posi, gears unknown
92 YJ 4.0, AX-15 5spd, np231, dana 30 front, dana 35 rear.
Belizean
Always Off-Roading Jeeper
- Posts
- 6,319
- Media
- 16
- Solutions
- 1
- Thanks
- 496
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
Swiss