360 swap help

[rj1984cj7]

Hey guys, just found me a '79 360 and a tf 727. The guy I got them from lost the bell house ing bolts, torq converter bolts, and the Transfer Case to Transmission bolts. Does anyone know if there is bolt kit or the correct sizes for these? Will any of the bolts work from the Dana 300 / T-18 /AMC 258 i6 / 4.2l ? Need all the help I can get, thanks in advance!

 

[CJim7]

Pretty sure you can use the bell housing bolts from the AMC 258 i6 / 4.2l . As for the others, that's a good question.

I would personally call the guys at Bulltear if no one here has answers for you. They know their AMC stuff pretty darn well.

 

[Hedgehog]

Well, I hope regular old #8 bolts from ACE, Lowes, Home Despot will work because my Jeep and bell housing are full of them. Except for flywheel and exhaust manifold bolts, I'm convinced they are something different.

 

[Deerejeep]

http://shop.totallystainless.com/ekamc.php


Sent from my iPad using Tapatalk

 

[somedude922]

Wow. Nice link deerejeep!

 

[rj1984cj7]

Thank you guys! Just ordered some, let you know how they turned out. Thanks for you time and all your help!