Blown hub
coldair
Full Time Jeeper
What's wrong with the axle you have now?
'81 had the 5 bolt hub also..
LG
Lumpy it has 6 bolt hubs and a Detroit locker with 4.10 gears
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Blown hub
- Thread starter coldair
- Start date Start date:
- Last post Last post:
Lumpy it has 6 bolt hubs and a Detroit locker with 4.10 gears
- Posts
- 14,791
- Thanks
- 55
- Location
- Springfield, Missouri-U.S.A. Earth
- Vehicle(s)
- '85 CJ-7, 258/4.2L 6cyl. Bought new in 1985. Full cage, Warn 8274 winch, Ford 9" rear, front/rear Detroit Lockers w/4:88 R&P. T-5 tranny and 4:1 t'case. 33X12.50-15 BFG/AT, MSD ign, on board air---
Are you sure it's a 'wide-track' axle. IIRC, the WT didn't come out till 82.
All Years, All Models - Axle, Differential & Drive Shaft - Front Axle Assembly - Dana Model 30 - 1972-1986 - VintageJeepParts.com
LG
All Years, All Models - Axle, Differential & Drive Shaft - Front Axle Assembly - Dana Model 30 - 1972-1986 - VintageJeepParts.com
LG
Posi
Always Off-Roading Jeeper
- Posts
- 8,034
- Media
- 172
- Thanks
- 78
- Location
- New England
- Vehicle(s)
- 54 Willys 3B, FI 401, T-18, ARB Locked, Hinkey Sidewinder Winch
81 came stock with 5 bolt hubs, if an 81 has a 6 bolt hub chances are it was an upgrade.
6 vs 5
6 vs 5
- Posts
- 14,791
- Thanks
- 55
- Location
- Springfield, Missouri-U.S.A. Earth
- Vehicle(s)
- '85 CJ-7, 258/4.2L 6cyl. Bought new in 1985. Full cage, Warn 8274 winch, Ford 9" rear, front/rear Detroit Lockers w/4:88 R&P. T-5 tranny and 4:1 t'case. 33X12.50-15 BFG/AT, MSD ign, on board air---
If it ain't bent or twisted-
You'll need to pull the cover and confirm it's a D/L.
Lots of folks have put in 'lunch-box' lockers and then say it's a Detroit Locker.
Here's what the real D/L looks like.
Detroit Locker 162SL60B - Detroit Locker by Eaton Performance for 27 Spline Dana 30 with 3.73 and Numerically Higher Gear Ratio - Quadratec
FL - Florida Dana 30 Detroit locker (soft locker) 3.93+
LG
You'll need to pull the cover and confirm it's a D/L.
Lots of folks have put in 'lunch-box' lockers and then say it's a Detroit Locker.
Here's what the real D/L looks like.
Detroit Locker 162SL60B - Detroit Locker by Eaton Performance for 27 Spline Dana 30 with 3.73 and Numerically Higher Gear Ratio - Quadratec
FL - Florida Dana 30 Detroit locker (soft locker) 3.93+
LG
wm69
Active Jeeper
- Posts
- 475
- Thanks
- 0
- Location
- Arkansas
- Vehicle(s)
- 85 CJ7 #1 258, T5 with BM shifter, Superior Axles, MC2100 TFI 8274 Warn Hubs 31 BFG MTs ( Mud Jeep)
85CJ7 #2 258, T176, 2.5 Rancho lift, 31 BFG AT's (the street Jeep)
The aftermarket Warn hubs and Superwinch hubs are good too. I've never had a problem with my Warn or Superwinch hubs (note that I'm referring the the Warn branded hubs, not the OEM Jeep hubs that were made by Warn.
Similar threads
-
Question
Reply's are voted
on for best answer
