Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
The only part that needs to be unpainted is where the nut screws down (ground) and the lip where it makes contact with the button when you press it. It snaps onto the insulator and the spring pushes the button assembly up so it floats, not making contact.
Follow-up, the reason I ask is that mine was rusted and I sandblasted it, but it will just rust again if I don't treat it with something. Any suggestions would be great. Thanks
The only part that needs to be unpainted is where the nut screws down (ground) and the lip where it makes contact with the button when you press it. It snaps onto the insulator and the spring pushes the button assembly up so it floats, not making contact.