Build Thread Cj8 ground up rebuild

Build Thread Cj8 ground up rebuild
Fluids are full except for the Transmission need a kick down cable........
Walked back out to the shop 2 hours later to see a puddle of coolant on the ground. Look and find one of the lower bolts in the head has coolant dripping from it........ :banghead: :banghead:
Now I have to drain the coolant get that bolt out and figure out what the hell is wrong with it.......

Sent from my XT907 using Tapatalk 2
 
OK problem solved the bolt was stripped and not tight re tapped it and threw a longer bolt in it

Sent from my XT907 using Tapatalk 2
 
Good to see you back at it. I'll have to swing by and check out the progress.
 
Its alive

Sent from my XT907 using Tapatalk 2
 
At the shop getting exhaust

Sent from my XT907 using Tapatalk 2
 
Putting the 42s on

Sent from my XT907 using Tapatalk 2
 
pype2e8a.jpg

yjamupuh.jpg

Sent from my XT907 using Tapatalk 2
 
gadyveru.jpg


Sent from my XT907 using Tapatalk 2
 
ega5ugyb.jpg


Sent from my XT907 using Tapatalk 2
 
gonna do the rest of the paint this weekend and finish the brakes

Sent from my XT907 using Tapatalk 2
 
Sent from my XT907 using Tapatalk 2
 
This thread was started in Feb of 2009. Congrats man , that Scrambler looks awesome. Now take it back to stock. :laugh:


 
It has only changed 10 times since then also.. thanks but its still not done. It will never be done there will always be something

Sent from my XT907 using Tapatalk 2
 
Nobody cares if its "done" but you had to be grinning like a proud Pa Pa to mover her around under her own power. :chug:

:notworthy:

It has only changed 10 times since then also.. thanks but its still not done. It will never be done there will always be something

Sent from my XT907 using Tapatalk 2
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$50.00
This donation drive ends in
1 day, 5 hours, 4 minutes, 7 seconds
  25.0%
Back
Top Bottom