Clutch movement question

[jakeh937]

Bell Crank.



Here's a pic of the linkage. I have the same year CJ5 and just replaced my linkage:



https://www.quadratec.com/sites/default/files/replacement-parts/cj-clutch.jpg

YES! There it is bell crank. #1. Ya my link between that and the fork are not completely perpendicular to the frame. I hope it won’t be an issue and I went with the heim joint to help that angle


Sent from my iPhone using Tapatalk

 

[JeeperChris]

I just replaced the bell crank and all the little bits that go with it and the rod it comes with that you are talking about is straight.

Also I would advise changing out the rod that goes from the pedal inside through the firewall to the other end of the bell crank with this one:

https://www.morris4x4center.com/rug...h-linkage-kit-stock-3-body-lift-16919-30.html

 

[jakeh937]

I just replaced the bell crank and all the little bits that go with it and the rod it comes with that you are talking about is straight.



Also I would advise changing out the rod that goes from the pedal inside through the firewall to the other end of the bell crank with this one:



https://www.morris4x4center.com/rug...h-linkage-kit-stock-3-body-lift-16919-30.html

I actually upgraded to that one as well! When I get it back, I’ll send you some pictures of it and how I did mine. [emoji1303]


Sent from my iPhone using Tapatalk