Crankshaft pulley

[Vesuvio]

Converting my manual to a power steering. Got all the parts, except the double grove crankshaft pulley; any idea where I can get one? Thanks

6 cyl engine

 

[Vesuvio]

Is the double grove pulley supposed to be one piece, or something like in this picture?

 

[JeeperChris]

The double-groove pulley on my AMC 258 i6 / 4.2l has a built-in harmonic balancer, it's not separate like on the bigger motors.

 

[JeeperChris]

Will your power steering have a V-belt or serpentine?

Balancer and first pulley:
https://www.morris4x4center.com/vibration-damper-harmonic-balancer-3242886.html

V-pulley to add to the balancer and pulley assembly:
https://www.morris4x4center.com/pulley-single-groove-crankshaft-3224690.html

And a double pulley for the power steering pump:
https://www.morris4x4center.com/mts-steering-pump-double-pulley-1.html

 

[Vesuvio]

V belt

 

[Vesuvio]

V belt

V belt
Posted via a mobile device.

 

[Montanaphilly]

Just remember the AMC 258 i6 / 4.2l and AMC 232 i6 both came in so any other cars. I have an online 6 in my jeep and the gremlin parts have come in handy.

Sent from my SM-N960U using Tapatalk

 

[MemphisPapa]

Morris4x4 closed. Anybody else know where I can find a double groove crankshaft pulley with the 3 bolt pattern on an AMC 258ci?

 

[TSB8C]

Mister Gasket part # 4977 maybe?

 

[CJ]

That is a water pump pulley. I have only been able to find single groove crank pulleys. I'm leaning towards ordering a used one from one of the many used Jeep suppliers...

 

[MemphisPapa]

Is there a list of such used part dealers? I've searched eBay and the like with no luck. I found a bolt-on option at BJ's Full Sized Jeep parts. I'm not sure how that will turn out.

 

[MemphisPapa]

I swapped out the water pump pulley today and still looking for the crank pulley. I had a moment today looking at what I have and briefly wondered if I could skip the crank pulley upgrade and buy a shorter belt from the double water pump pulley to the power steering pump, but I don't think there is enough travel in the PS bracket. Then I remembered the travel on the alternator is very good. Has anybody tried this without the double pulley on the crankshaft and used only the water pump double pulley?