Diff Dana 30 spindle or axle bent?
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Diff Dana 30 spindle or axle bent?
- Thread starter bbcj576
- Start date Start date:
- Last post Last post:
Differentials
Doright
Jeeper
- Posts
- 7
- Thanks
- 2
- Location
- Pahrump, NV, USA
- Vehicle(s)
- 81 CJ7 RENEGADE 304, 456 GEARS + LOCKERS FRONT REAR, 4 INCH LIFT, XFER CASE LOW GEAR KIT.
how did you install your new races?
They may not be fully seated and True.
I use a Press, They can be driven with a Hammer but its not the best way to be sure there strait and true.
They may not be fully seated and True.
I use a Press, They can be driven with a Hammer but its not the best way to be sure there strait and true.
I haven't yet. The new hub should be here tomorrow. Seems like no matter who it was prior that put new races in, the slight wobble persist so I went with the new hub and spindle option.
Doright
Jeeper
- Posts
- 7
- Thanks
- 2
- Location
- Pahrump, NV, USA
- Vehicle(s)
- 81 CJ7 RENEGADE 304, 456 GEARS + LOCKERS FRONT REAR, 4 INCH LIFT, XFER CASE LOW GEAR KIT.
Ouch that couldn't have been cheap
I am looking for a new 6 Bolt adapter for my Hub I broke one into 3 pieces in my front yard!
I cant find a source for the old Warn Hubs.
heres a link to typical ebay add
I am looking for the Black part in the main picture....
All these adds on ebay show one, And pics show Hubs in the Box dont show the Adapter deal.... I am at a loss adds on Quadratech of 4wheel parts dont list the part that I have found.
Any one know where I can get this or what its called right now its unabtanium for me at this point I really want to get this rig back on the trail. I know I have a Dana 30 axle set up NOT a 44.
I wish I had a Dana 44 I wouldn't be afraid of 35s if I had a 44.
I am looking for a new 6 Bolt adapter for my Hub I broke one into 3 pieces in my front yard!
I cant find a source for the old Warn Hubs.
heres a link to typical ebay add
Warn 20990 Premium Hub-Dana 44 for sale online | eBay
Find many great new & used options and get the best deals for Warn 20990 Premium Hub-Dana 44 at the best online prices at eBay! Free shipping for many products!
www.ebay.com
I am looking for the Black part in the main picture....
All these adds on ebay show one, And pics show Hubs in the Box dont show the Adapter deal.... I am at a loss adds on Quadratech of 4wheel parts dont list the part that I have found.
Any one know where I can get this or what its called right now its unabtanium for me at this point I really want to get this rig back on the trail. I know I have a Dana 30 axle set up NOT a 44.
I wish I had a Dana 44 I wouldn't be afraid of 35s if I had a 44.
Doright
Jeeper
- Posts
- 7
- Thanks
- 2
- Location
- Pahrump, NV, USA
- Vehicle(s)
- 81 CJ7 RENEGADE 304, 456 GEARS + LOCKERS FRONT REAR, 4 INCH LIFT, XFER CASE LOW GEAR KIT.
If it was the Spindle it wouldn't wobble unless the hardware securing it was loose? If tight it would just be off in one direction or the other and would probably rub something.
Now bearing races not being true or the brake Rotor being warped from over heating the breaks are very possible.
Armyvet25
Beach Runner
- Posts
- 726
- Media
- 14
- Resources
- 1
- Solutions
- 2
- Thanks
- 172
- Location
- Lorain, OH, USA
- Vehicle(s)
- 06 TJ, 83 CJ7, 2012 JKU, 1995 YJ
can't you buy a used set on ebay, take the parts you need?Ouch that couldn't have been cheap
I am looking for a new 6 Bolt adapter for my Hub I broke one into 3 pieces in my front yard!
I cant find a source for the old Warn Hubs.
heres a link to typical ebay add
Warn 20990 Premium Hub-Dana 44 for sale online | eBay
Find many great new & used options and get the best deals for Warn 20990 Premium Hub-Dana 44 at the best online prices at eBay! Free shipping for many products!www.ebay.com
I am looking for the Black part in the main picture....
All these adds on ebay show one, And pics show Hubs in the Box dont show the Adapter deal.... I am at a loss adds on Quadratech of 4wheel parts dont list the part that I have found.
Any one know where I can get this or what its called right now its unabtanium for me at this point I really want to get this rig back on the trail. I know I have a Dana 30 axle set up NOT a 44.
I wish I had a Dana 44 I wouldn't be afraid of 35s if I had a 44.
Doright
Jeeper
- Posts
- 7
- Thanks
- 2
- Location
- Pahrump, NV, USA
- Vehicle(s)
- 81 CJ7 RENEGADE 304, 456 GEARS + LOCKERS FRONT REAR, 4 INCH LIFT, XFER CASE LOW GEAR KIT.
I found a set of 27 spline 6 bolts just now on ebay UNGODLY Price Warn would think twice about discontinuing them.
I bought them rather than running the Mile marker brand I hope they work????
I have always had Warn on my Jeeps..... Never had a failure till now has to be a reason why they backed off repeatedly.
I will be doing a full disassembly and clean and lube of both sides brakes spindles steering hubs whole 9 yards clean lube paint everything.
I bought them rather than running the Mile marker brand I hope they work????
I have always had Warn on my Jeeps..... Never had a failure till now has to be a reason why they backed off repeatedly.
I will be doing a full disassembly and clean and lube of both sides brakes spindles steering hubs whole 9 yards clean lube paint everything.
Last edited: