Drum to Disc, Where does the bracket bolt to?
- Posts
- 589
- Thanks
- 0
- Location
- Orlando, FL
- Vehicle(s)
- 1985 CJ7, AMC 360, lunati cam, AX15, Affordable Fuel Injection, edelbrock performer manifold, 21 gallon fuel tank, Old Man Emu 2.5 inch lift, 1 inch body lift, tie rod flip, HMMWV H1 steering box, rear disc brake conversion, Dana 44 rear, YJ to CJ tub conversion, still working on 33 inch tires, Metallic dark blue paint.
Scrambler Project, cosmetically taking it back to the 80's- 1984 Scrambler, Laredo. 258cc, Holley Sniper EFI, 30in tires on Laredo polished wheels, Dana 44 rear, OME 2.5 YJ springs/lift, HMMWV steering box
Previously owned cj 7, 1979, Renegade, 258 and a '89 wrangler
Thank you so much....I love you.... and I mean that in the most hetero way imaginable.
When I measured the axle, I have measured each flange to the pumpkin which is 22 inches, and the pumpkin which is 9 1/2 inches, giving the total length of 53.5 inches.... should I be measuring from somewhere else?
So I think this kit should fit it RP 4WD // Serious Off-Road Since 1989 — Scout II Dana 44 Rear Disc Brake Conversion Kit
When I measured the axle, I have measured each flange to the pumpkin which is 22 inches, and the pumpkin which is 9 1/2 inches, giving the total length of 53.5 inches.... should I be measuring from somewhere else?
So I think this kit should fit it RP 4WD // Serious Off-Road Since 1989 — Scout II Dana 44 Rear Disc Brake Conversion Kit