Fuel Lines for complete rebuild

[Rockhpr]

I am doing a frame off rebuild my 86 CJ7 . It has a 4.0L from a Cherokee. I have put an electric pump in the fuel tank and an external adjustable regulator.
I am going to put all new fuel lines in it. I am looking for recommendations on where to get the steel lines, fitting types (AN vs Hose Clamps) ect. I plan on making all my own bends. Hints, Tips, Suggestions...all appreciated.

 

[Torxhead]

The big box 4wd outfits like Four Wheel Parts, 4wd Hardware, Quadratec, and Morris sell complete pre made fuel lines. They come in steel and stainless steel. Here is an example from 4wd Hardware:https://www.4wd.com/b/performance-p...ardware/fuel-line/fuel-line/_/N-cl7fpZ1z0uj7m. Since you are adapting to a fuel injected engine, you might have to change the fuel line sizes though.

 

[gert]

Hmm you will be running 50 plus psi I think adding AN fittings or some kind of threaded connector to your fuel line is better than using hose clamps and high pressure rubber hose

I will eventually be putting fuel injection on mine but have not really thought about the hose connections yet let us know what you come up with


Sent from my iPhone using Tapatalk

 

[Rockhpr]

The PSI is 49. I have been running it for a few years with hose clamps and high pressure fuel line but I just want to reassemble it more "professionally".

 

[Lumpy Grits]

AN and standard flare fittings are 2 different mating angles, and do not interchange.
LG