Full size axle swap
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.To dismiss this noticeclick the top right X.
Full size axle swap
- Thread starter coldair
- Start date Start date:
- Last post Last post:
mylittlecj5
RIP Mike, we'll all miss you
Me too, but I am going to use Waggy axles instead to keep it kinda street legal.
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,248
- Media
- 360
- Resources
- 2
- Thanks
- 88
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
Poisn Spider makes a kit to install full sized axles in a CJ Poly Performance JEEP/TRUCK & BUGGY*::*Suspension*::*Suspension & Lift Kits*::*Jeep Suspension Systems*::*1976-1986 Jeep CJ Suspesnion Systems*::*Poison Spyder Customs*::*Poison Spyder Jeep CJ Full Width Axle Conversion Kit - 4X4 Off-Road Parts, JK S
You have to mount the springs outboard of the frame rails like this:
Almost the entire wheel will fit outside the fenders so check your local laws first.
You have to mount the springs outboard of the frame rails like this:
Almost the entire wheel will fit outside the fenders so check your local laws first.
Jimbos76cj
Full Time Jeeper
- Posts
- 2,223
- Thanks
- 1
- Location
- St.Cloud FL
- Vehicle(s)
- 83 CJ-7.. 4" YJ springs front rear, J-10 44 front/AMC 20 rear,6 cy auto dana 300 35' bfg Done and gone!!
Ask me about my head light upgrade harness!!!
http://www.jeep-cj.com/forums/f98/jimbos-1-2-build-thread-9967/
on post number 8 it shows the mounts I made to relocate the axles out side of the frame. I think I have about $30 tied up in the steel for the front (I got screwed on the price). those will get mountd to the out side of the frame. spring mounts will get wleded on for the rear and shackle mounts bolted on for the front.
on post number 8 it shows the mounts I made to relocate the axles out side of the frame. I think I have about $30 tied up in the steel for the front (I got screwed on the price). those will get mountd to the out side of the frame. spring mounts will get wleded on for the rear and shackle mounts bolted on for the front.