• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

Gauge Questions

Gauge Questions

phinleft

Jeeper
Posts
171
Thanks
0
Location
Baton Rouge, LA
Vehicle(s)
78 CJ7, Amc 304 V8 - AMC 20, DANA 30, Quadratra Trac TH400, 35" Mickey Thompsons MTZPainted LSU Yellow/Gold. Modified with 4bl Edelbrock Carb.
My gas gauge is an aftermarket stand alon installed by the previous owner. WHen I start the cj, the needle goes from E and drops down below E. When I stop cranking it goes back to E. I am thinking it is an electrical but everything seems to grounded correctly.

What is the correct lenght for a speedo cable on a 76 CJ5 ?
 
different gas gauges work on different resistances in the sending unit, they have to match. If a PO changes on and not the other it could be a difference in tolerances
Just a thought
 
different gas gauges work on different resistances in the sending unit, they have to match. If a PO changes on and not the other it could be a difference in tolerances
Just a thought

Good thought, I was affraid to touch this but You got good smarts.:notworthy:
No mix and match on sending units and guages.
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$0.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  0.0%
Back
Top Bottom