GM nv3500

[JakeRod13]

Has anyone had any experience with adapting NV3500 from a GM 1500 in a CJ7 with a sbc350?

Thanks Jacob

 

[tarry99]

Has anyone had any experience with adapting NV3500 from a GM 1500 in a cj7 with a sbc350?

Thanks Jacob

Five speed with 27% OD.........not a bad Transmission , but the right gears and Horsepower for it's use is important.

Read this from Novak:The NV4500 Transmission - Novak Conversions

 

[JakeRod13]

Thanks for the response. I can't find any info about adapting a GM nv3500 with a Dana 300 t. Case. Also, will it bolt straight on to the sbc (the nv3500 comes with an integrated bell house)

 

[tarry99]

GM to GM should bolt up............check out Novak's site.

 

[Bent]

The tail housing is long and the Transfer Case bolt pattern is clocked wrong for the Dana 300 . Also, I'm pretty sure most of the GM NV3500s have a 27 spline output shaft. It might be possible to use the short NV3500 out of a Dodge Dakota with the 23 spline output shaft that will bolt to a Dana 300 and swap the front half of the case and input shaft from a GM NV3500. More parts to chase though. Post pictures if it works out.