Engine ??Help please, Looking to find the 90 degree elbow that connects air filter housing to air duct hose (Iron Duke engine)

[LaredoIronDuke]

I have a 1980 CJ7 Laredo with the Iron Duke engine. The air filter housing is connected to the air duct hose with a 90 degree plastic/metal connector. Looking to find that 90 degree connector. Any help on where to find one is greatly appreciated. Pic included for reference. Thank you.

 

[Manic Mechanic]

Dunno if it's the same as the AMC 258 i6 / 4.2l but I can check my stash when the kids go down for a nap and I can get to the barn

Sent from my E7110 using Tapatalk

 

[Manic Mechanic]

6 cylinders come come out at an angle and don't use a plastic elbow

Sent from my E7110 using Tapatalk

 

[Belizean]

First time I’ve seen that angle elbow. Mine came with the AMC 4 cylinder. The accordion duct work went straight to the part on the housing.

 

[Manic Mechanic]

There is a listing

Sent from my E7110 using Tapatalk

 

[CJ]

I have a 1980 CJ7 Laredo with the Iron Duke engine. The air filter housing is connected to the air duct hose with a 90 degree plastic/metal connector. Looking to find that 90 degree connector. Any help on where to find one is greatly appreciated. Pic included for reference. Thank you.

View attachment 102576

That looks a GM elbo. Is that a round or rectangular accordion tube? If round, the diameter or rectangular, the width / height.

 

[LaredoIronDuke]

That looks a GM elbo. Is that a round or rectangular accordion tube? If round, the diameter or rectangular, the width / height.

Thank you for the note, you are correct the 1980 Jeep Iron Duke was the GM version. The tube is rectangular.

There is a listing

Sent from my E7110 using Tapatalk

Manic Mechanic, thank you very much for the Mopar pic, that helps tremendously, I found the site you took the pic of an will reach out to them accordingly. Much appreciated!

 

[CJ]

I'm almost positive I have seen that on many GM scrap yard cars. Do you have access to a yard to browse around?