key switch
rr41mag
Full Time Jeeper
- Posts
- 2,015
- Thanks
- 1
- Location
- Panama city florida
- Vehicle(s)
- 04 dodge truck, 1966 chevy truck, 2012 rav4
And finally a 1981 jeep cj7 258 hardtop
I'm down to this point and can't get my key switch out
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.To dismiss this noticeclick the top right X.
key switch
- Thread starter rr41mag
- Start date Start date:
- Last post Last post:
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,248
- Media
- 360
- Resources
- 2
- Thanks
- 88
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
The lock cylinder has a spring loaded tab you have to press to get it out. You can see it in the bottom cylinder of this picture.
To remove it you have to press in with a screw driver in this spot (red arrow):
BTW here's another thread on the topic: http://www.jeep-cj.com/forums/f7/1980-cj7-ignition-problems-9181/index3.html
To remove it you have to press in with a screw driver in this spot (red arrow):
BTW here's another thread on the topic: http://www.jeep-cj.com/forums/f7/1980-cj7-ignition-problems-9181/index3.html
Last edited: