Misc Led fitment issue

[Black Thumb]

My headlights were old and dim. Make driving at night exciting.

I bought some plug and play leds at AutoZone, and some longer screws for the rock cages, but the bezels (trim rings) are too shallow the really seat. That’s really the only boggle.
Are there deeper bezels, or should I tack an extension onto the top tab so it’ll grab?

Anyone else run into this fitment issue?

 

[TSB8C]

I used True Mods H6024 units. Less than $90 on Amazon. They have a built-in CANBus, standard H4 style plug, optional turn signal rings, and mostly fit right in. I say "mostly" because while they fit the opening and the existing stock bezel rings, you do have to trim the rear housing "bucket" due to the heat sink on the rear of the headlights. No biggie. I used a pair of tin snips and it took all of about 5 minutes. No affect on the adjusters/springs where they attach to the housings at all.