Need Help!!

[etempleton]

Dont do much as far as mechanics on my own ride decided i was going to change out break pads. I got in to it then noticed everything needed replacing. pulled axle new bearings etc. put everything back together now it wont roll when its in gear??? i have to put it in 4 wheel to get it to move. Anyone know what i did wrong or could have messed up putting it back together? any help is appreciated again im no mechanic.

Thank you

 

[Torxhead]

Could be that the brakes are adjusted out to far. The problem must be in the brakes or the bearing installation.

 

[mtnwhlr]

I would start by lifting each wheel and see if you can spin the tire to find out which one or ones you are having trouble with.

 

[Old Dog]

I would start by lifting each wheel and see if you can spin the tire to find out which one or ones you are having trouble with.

Make sure it's in N and the hubs are unlocked. Tell us what you find.
Also tell us what all you changed.