Question about 4.0 intake/head swap
thunderlizard66
Jeeper
So I bought this CJ and supposedly it has a 4.0 swap done. It wasn't running, fuel pump issue. I had seen it running previously so I know it ran, However after reading the forums and searching the web I went looking and found the following:
1. No VSS, it just has the speedo cable.
2. No CPS mounted to the bell-housing or harmonic balancer
3. EGR solenoid and the ballast resistor are not hooked up
So I'm pretty sure this is a renix, because I found the Bendix solenoid panel on the fender and the valve cover doesn't say 4.0.
Sent from my iPhone using Tapatalk
1. No VSS, it just has the speedo cable.
2. No CPS mounted to the bell-housing or harmonic balancer
3. EGR solenoid and the ballast resistor are not hooked up
So I'm pretty sure this is a renix, because I found the Bendix solenoid panel on the fender and the valve cover doesn't say 4.0.





Sent from my iPhone using Tapatalk