Show me your winch mounts
stroked10
Jeeper
If you mounted your winch to the front of your jeep, can you show them to me? A pic and what you did would be great!
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Show me your winch mounts
- Thread starter stroked10
- Start date Start date:
- Last post Last post:
mylittlecj5
RIP Mike, we'll all miss you
Re: SHow me your winch mounts
I dont have any good pics on this computer, and the Tb drive is packed for the move, but I built my own bumper and installed a common winch plate on it. Used 6 grade 8 bolts to hold it down.
here is a pic of the bumper without the winch..
and with the winch mounted..
I dont have any good pics on this computer, and the Tb drive is packed for the move, but I built my own bumper and installed a common winch plate on it. Used 6 grade 8 bolts to hold it down.
here is a pic of the bumper without the winch..
and with the winch mounted..
poppatello
Senior Jeeper
- Posts
- 500
- Thanks
- 0
- Location
- New Castle, De
- Vehicle(s)
- 84 Cj, 4 Banger, 4.5 BDS Lift, 35" KM2, Twin Stick, Nuttered...
I took about a year to plan my front bumper. I originally wanted it to incorporate my plow but scrapped that idea because of my lift. However, I have a surf rack and need to move the boat around. So I wanted a fully functional front bumper that would house my Warn 8274. I know it's the best...
Even cut out so I can get to the steering box without pulling the front bumper.
My surf rack mounting set up.
The bumper is mounted in 10 locations with grade 8 bolts and tied into the frame. It's not going anywhere. If it is the frame is the weakest point...
Even cut out so I can get to the steering box without pulling the front bumper.
My surf rack mounting set up.
The bumper is mounted in 10 locations with grade 8 bolts and tied into the frame. It's not going anywhere. If it is the frame is the weakest point...
IOPort51
NOT the voice of reason Jeep-CJ.com
- Posts
- 13,956
- Featured
- 5
- Media
- 458
- Thanks
- 13
- Location
- Garland Texas
- Vehicle(s)
- 1977 cj-5
4.2 W/MC2100 carb, 4.0 head W/3 angle valves,SS Header,TFI ignition with MSB-6 offroad module,CS144 140 amp RPS alternator with remote regulator T-150,d-20,Dana 44 with OX lock and disk brakes. D-30 with Spartin locker,
skyjacker 2.5 lift?nitro shocks,31" BFG A/T off road.8000 lb Warn winch, original owner.=^)
2006 Toyota Tacoma
Mine has kind of evolved over 30 years or so.
- Posts
- 11,552
- Media
- 57
- Thanks
- 11
- Location
- Frederick colorado
- Vehicle(s)
- 84 cj7, 91 cherokee, 78 chevy 3500 pu, 78 CJ7
This is a Warn Universal winch mount
poppatello
Senior Jeeper
- Posts
- 500
- Thanks
- 0
- Location
- New Castle, De
- Vehicle(s)
- 84 Cj, 4 Banger, 4.5 BDS Lift, 35" KM2, Twin Stick, Nuttered...
Mine has kind of evolved over 30 years or so.
I like it. What is that black thing above the cable cut out???
H4zY
Jeeper
- Posts
- 18
- Thanks
- 0
- Location
- Atlanta, GA
- Vehicle(s)
- 84 CJ7 forest green from Pearl Harbor AMC Hawaii.
4.2l carb, Ford T18 1st gear 7:1 ratio, D300, Amc20, 1piece moser axles rear,Dana30 front, 410 gears, 33"tires
IOPort51
NOT the voice of reason Jeep-CJ.com
- Posts
- 13,956
- Featured
- 5
- Media
- 458
- Thanks
- 13
- Location
- Garland Texas
- Vehicle(s)
- 1977 cj-5
4.2 W/MC2100 carb, 4.0 head W/3 angle valves,SS Header,TFI ignition with MSB-6 offroad module,CS144 140 amp RPS alternator with remote regulator T-150,d-20,Dana 44 with OX lock and disk brakes. D-30 with Spartin locker,
skyjacker 2.5 lift?nitro shocks,31" BFG A/T off road.8000 lb Warn winch, original owner.=^)
2006 Toyota Tacoma
BajaEdition
Resident 'Old' Jeep Shaman
- Posts
- 5,486
- Featured
- 1
- Media
- 136
- Resources
- 2
- Thanks
- 7
- Location
- Riverside Ca
- Vehicle(s)
- 67 cj5,225 Dauntless, D30,chrome molies, detroit, D44, full floating detroit, custom steering, disc all the way around,2 inch lift on 31s, armored up
70 cj6 4 inch lift
guess mine is kind of plain compared to the psycho squirrels.
IOPort51
NOT the voice of reason Jeep-CJ.com
- Posts
- 13,956
- Featured
- 5
- Media
- 458
- Thanks
- 13
- Location
- Garland Texas
- Vehicle(s)
- 1977 cj-5
4.2 W/MC2100 carb, 4.0 head W/3 angle valves,SS Header,TFI ignition with MSB-6 offroad module,CS144 140 amp RPS alternator with remote regulator T-150,d-20,Dana 44 with OX lock and disk brakes. D-30 with Spartin locker,
skyjacker 2.5 lift?nitro shocks,31" BFG A/T off road.8000 lb Warn winch, original owner.=^)
2006 Toyota Tacoma
simplicity is the basis of all good engineering. 
those ears up front, those would be great to put clevis rings in if they had holes in them.
that is a pre finished pic, I was testing the fit
I have 7/8th holes in them now and so I could get 3/4 inch shackles on
those ears up front, those would be great to put clevis rings in if they had holes in them.
guess mine is kind of plain compared to the psycho squirrels.
that is a pre finished pic, I was testing the fit
I have 7/8th holes in them now and so I could get 3/4 inch shackles on
Last edited by a moderator:
duffer
Active Jeeper
- Posts
- 480
- Media
- 9
- Thanks
- 45
- Location
- Bozeman, MT
- Vehicle(s)
- 1955 CJ3B: Dart/AFR aluminum 441 sbc, AGE M22W trans, "super" D18 w/ TeraLows & Warn OD, FF44 ARB/Dutchman Rear, D44 front-ARB/Reid/Dutchman, 4 wheel discs, York OBA, PP welder, 8274 w/ 9.5 XP motor/Zeon 12 contactor, glass/aluminum body, 33-12.5's;
1968 CJ5: all stock (V6/T86/D18/D27/D44) except 4bbl & headers and rear aux tank, HD rear 44 housing, Warn OD, Belleview winch, Whitco top (New Blue)
1968 CJ5: mostly stock (V6/T90/D18/D27/D44), unknown make 3" lift springs, 11" Bendix brakes, Warn OD, unknown electric winch, Kayline tire/jerry can carrier, Bestop Super Top (Old Blue)
1947 2A and 49 3A that may or may not get built, and several FC/wagon derelicts
Just about everyone will have their own philosophy for winch mounting. Mine are:
1) make sure it is strong enough to support the winch to be used
2) keep it light
3) keep it low (both for center of G, less air obstruction, and better winch pull angle)
4) use a roller fairlead, even with synthetic line.
Keeping it mounted low and using a roller fairlead allows you to run the cable/line under the Jeep for a reverse pull and has gotten me out of several jams when the front end was on the ground and I couldn't get enough traction to back up.
This is the next to last one I did for the 3B-it has been remodeled for the 8274 since these were taken.
1) make sure it is strong enough to support the winch to be used
2) keep it light
3) keep it low (both for center of G, less air obstruction, and better winch pull angle)
4) use a roller fairlead, even with synthetic line.
Keeping it mounted low and using a roller fairlead allows you to run the cable/line under the Jeep for a reverse pull and has gotten me out of several jams when the front end was on the ground and I couldn't get enough traction to back up.
This is the next to last one I did for the 3B-it has been remodeled for the 8274 since these were taken.
