• To celebrate the 4th of July, starting today (07/01/2025) all User Upgrades will be reduced by 10% (thru 07/08/2025) To use this special coupon use the code 2025-4th-10percent at check out. If you are already a supporter your existing package will be extended.
    Thank you for your support!
  • Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

Steering column .. access to lock rack

Steering column .. access to lock rack

pomerom

Jeeper
Posts
3
Thanks
0
Location
Florida
1982 CJ8 .. need to access the area where the lock rack assembly is located. Already have it apart to where the key cylinder is removed, but cannot get further.

This is a non-tilt steering column.

Vehicle is down until I get this fixed .. so I need some advice before I force something and maybe cause more damage.

Can somebody please tell me what to do next??

Thanks .....
 
if you are wher you can see the lock, there should be three more phillips head screws to take out. take them out then remove that collar. then you should be able to see what to do next. also if you are this far, go ahead and get the bearing rebuild kit and replace them at this time. if i told you wrong let me know, mine is a tilt column but they should be close. hope this helps...
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$0.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  0.0%
Back
Top Bottom