U-JOINT at steering box
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
U-JOINT at steering box
- Thread starter JEEPURZ
- Start date Start date:
- Last post Last post:
CJ
Admin
- Posts
- 23,244
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 48
- Thanks
- 840
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
One of the first things I replace on most CJ's. The stock one leaves a lot to be desired. 
Borgeson Universal Company :: Jeep 1972-06 :: Jeep Steering Shafts :: 1976-1986 CJ, Manual Steering
Borgeson Universal Company :: Jeep 1972-06 :: Jeep Steering Shafts :: 1976-1986 CJ, Manual Steering
IOPort51
NOT the voice of reason Jeep-CJ.com
- Posts
- 13,956
- Featured
- 5
- Media
- 458
- Thanks
- 12
- Location
- Garland Texas
- Vehicle(s)
- 1977 cj-5
4.2 W/MC2100 carb, 4.0 head W/3 angle valves,SS Header,TFI ignition with MSB-6 offroad module,CS144 140 amp RPS alternator with remote regulator T-150,d-20,Dana 44 with OX lock and disk brakes. D-30 with Spartin locker,
skyjacker 2.5 lift?nitro shocks,31" BFG A/T off road.8000 lb Warn winch, original owner.=^)
2006 Toyota Tacoma
IMHO
for $2.50 I choose to rebuild the original.
It is unique, to my experience, I have never noticed one like it on any other vehicle. They again I never really looked. the original seems to have worked well for a long time with no maintenance at all. In fact, when I did notice mine and took it apart it was and had been full of dirt, no lubrication at all, for a long long time. and it still worked well.
for $2.50 I choose to rebuild the original.
It is unique, to my experience, I have never noticed one like it on any other vehicle. They again I never really looked. the original seems to have worked well for a long time with no maintenance at all. In fact, when I did notice mine and took it apart it was and had been full of dirt, no lubrication at all, for a long long time. and it still worked well.
One of the first things I replace on most CJ's. The stock one leaves a lot to be desired.
Borgeson Universal Company :: Jeep 1972-06 :: Jeep Steering Shafts :: 1976-1986 CJ, Manual Steering
73CJ
Crazy Sr. Respected Jeeper
- Posts
- 3,533
- Media
- 57
- Thanks
- 10
- Location
- Detroit Lakes, MN
- Vehicle(s)
- 73 CJ5 4.0 head on a 258, HEI, Holley Projection w/ 4.56, Detroit lockers Narrowed D44 front and full float D44 rear T14 w/ D20 4 wheel discs, 38.5 Boggers
I put a Chevy power steering box in years ago with the 'rag' joint. (rubber disc) Pure garbage. I was replacing it every year. Failed on the trail. I went the Flaming River route, shaft and column, and don't look back. Also ARG box. No slop. No Problems. Well worth it.