Build Thread Vader , A multi year Cj7
1800 for the top ?
No its the top doors and seats altogether
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Build Thread Vader , A multi year Cj7
- Thread starter Petescj
- Start date Start date:
- Last post Last post:
No its the top doors and seats altogether
Belizean
Always Off-Roading Jeeper
- Posts
- 7,053
- Featured
- 88
- Media
- 20
- Solutions
- 4
- Thanks
- 766
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
Doors like these ? I wonder if you have the old framework, whether new skins can be ordered.
Yup just like those. I know they used to sell skins years ago but I havent seen them advertised like that in a while. Probably best to contact Bestop directly.
As far as price. Thought it was decent as well and without getting the framework I could get the tinted windows. That was a win-win. With only running the Jeep in decent weather it should last awhile. Cant wait for the doors to show up..
Belizean
Always Off-Roading Jeeper
- Posts
- 7,053
- Featured
- 88
- Media
- 20
- Solutions
- 4
- Thanks
- 766
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
- Posts
- 12,365
- Featured
- 3
- Media
- 71
- Resources
- 2
- Thanks
- 279
- Location
- Rockwall,TX
- Vehicle(s)
- 1983 cj7, 1971 Dart, 1942 Willys slat grill
My BT soft doors are sewn over the frame I think they probably don’t sell them separate because of that
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Belizean
Always Off-Roading Jeeper
- Posts
- 7,053
- Featured
- 88
- Media
- 20
- Solutions
- 4
- Thanks
- 766
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
My originals were sewn on, but replacements slip on, the the black plastic flip handle ones. Not sure about the paddle handle ones like above.
- Posts
- 12,365
- Featured
- 3
- Media
- 71
- Resources
- 2
- Thanks
- 279
- Location
- Rockwall,TX
- Vehicle(s)
- 1983 cj7, 1971 Dart, 1942 Willys slat grill
3 year old paddle handle, I find it an interesting way of attaching the fabric
Sent from my iPhone using Tapatalk
Belizean
Always Off-Roading Jeeper
- Posts
- 7,053
- Featured
- 88
- Media
- 20
- Solutions
- 4
- Thanks
- 766
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
Yeah mine are the 1 piece replaceable door skins. 2 piece are a different animal. I might be getting a set of 2 piece that will need to be replaced in the near future one way or another. That is why i was wondering. They come with a vehicle that i have been thinking about since July that is coming up for sale.
Last edited:
- Posts
- 12,365
- Featured
- 3
- Media
- 71
- Resources
- 2
- Thanks
- 279
- Location
- Rockwall,TX
- Vehicle(s)
- 1983 cj7, 1971 Dart, 1942 Willys slat grill
Wow yours are way different that’s even more interesting
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Belizean
Always Off-Roading Jeeper
- Posts
- 7,053
- Featured
- 88
- Media
- 20
- Solutions
- 4
- Thanks
- 766
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
That is the frame from my 84 original soft top 7 with replacement door skin on it. Pretty simple to change out.
If you dont get the other vehicle for some reason and still want to go that route you can have my set of frames whatever it costs to ship. Just know that the two piece doors wont work with other tops. Has to be a bestop. The windshield angle is different. I tried doors like yours with my supertop and it was a
show.
Last edited:
Belizean
Always Off-Roading Jeeper
- Posts
- 7,053
- Featured
- 88
- Media
- 20
- Solutions
- 4
- Thanks
- 766
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
Thanks for the offer. If I don't get it, I will have no need like you said. The top is a STC soft top that the doors are used with.
Love coming home to Jeep parts. Been getting lucky with some sales right now and caught this Fishbone Offroad bumper for $320. Finish looks great and pretty stout as well. D rings included.
Well a week away from a full 3 months , but the doors finally got here today. A week after I got an email saying they wouldnt ship till the end of March. 
Now if I can just get a warm day off of work to install it all.
Now if I can just get a warm day off of work to install it all.
CJ
Admin
- Posts
- 26,945
- Featured
- 6
- Media
- 881
- Resources
- 193
- Solutions
- 62
- Thanks
- 1,158
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
It will warm up soon... 
Well since buying the new house Ive bought more plants , flowers , pavers and border wall blocks than Jeep parts and Im actually kind of ok with that. Been enjoying time with Vicki on our yard projects but I finally snuck some parts out of the 3rd floor and added them to the Jeep
Love the look of the Fishbone bumper over the stock one. Have to shave down some shims that came with it for the finished install but overall straight forward.
Love the look of the Fishbone bumper over the stock one. Have to shave down some shims that came with it for the finished install but overall straight forward.
Got the Rugged Rige seats in as well. Beware on these if you have a belly. The exta padding un the seat puts you higher in the leg area and cloer to the steering wheel. I got a smaller Grant wheel and promise to diet. 
We're just below $5 a gallon here for 87 octane so the 10 mpg I average has meant very Limited use for the Cj considering it'd suck up 4.5 gallons back and forth to work one day from the new place.
Hoping to put the new top on within the next two weeks. Cant wait to see how that looks. Probably wont get a whole lot of use this year but still making a little progess here and there.
We're just below $5 a gallon here for 87 octane so the 10 mpg I average has meant very Limited use for the Cj considering it'd suck up 4.5 gallons back and forth to work one day from the new place.
Hoping to put the new top on within the next two weeks. Cant wait to see how that looks. Probably wont get a whole lot of use this year but still making a little progess here and there.
- Posts
- 729
- Media
- 10
- Thanks
- 75
- Location
- West Springfield, MA
- Vehicle(s)
- 1986 CJ7, SBC 350, Dana 300, D30, AMC20
I’ve got the same with my Smittybuilt seats, very comfortable, but with the sliders and my nice thick legs it’s tight. That’s why I spent the coin on a tilt column.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Belizean
Always Off-Roading Jeeper
- Posts
- 7,053
- Featured
- 88
- Media
- 20
- Solutions
- 4
- Thanks
- 766
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
Similar threads
Build Thread
My inherited 81 CJ7
Build Thread
82 Cj7 rebuild / restore.
Build Thread
1983 CJ7 Build Project
