Which Transmission and Transfer Case do I have?

[77CeeJay]

I bought my first Jeep and my first 4wd vehicle yesterday, a 77 CJ with a 3 speed manual and 360 AMC motor. Very fun.

I'd like to put twin stick Transfer Case levers in it, but I don't know exactly what Transmission /Transfer Case I have. I don't want to assume anything. I do all my own work and this is well within my abilities, I'm just ignorant on how some of this tech works until I learn it.

Also, this is my first carb engine other than several motorcycles and an 85 Chevy pickup when I was a kid. Where do I start on understanding how to install a manual choke to this thing? This morning was a pain with how cold it was.

Thanks all. Please be gentle.

 

[j6824]

Congrats! Welcome to the land of degenerates

I'd guess by year model you have a 20...that'd be assuming it hasn't been swapped by a PO

Here's a link to Novak's site...great info to be had as you dive in. This particular page will help you i.d. yours:

https://www.novak-adapt.com/knowledge/transfer-cases/

As far as the choke, most any universal cable will work...the linkage will be the key. Again...would depend on what you have. Could be a 2 or 4bbl.
Motorcrafts, Edelbrocks and Holleys are pretty popular swaps for those who don't end up going TBI. An electric choke is an option as well.

 

[Lumpy Grits]

:ww:

If you could post or link us to some pictures, would be the best way to ID.
LG