• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
    To dismiss this notice
    click the top right X.

232 cj5 engine swap ???

232 cj5 engine swap ???

Daniel1381

Jeeper
Posts
121
Thanks
0
Location
Longview tx
Vehicle(s)
1976 cj 5
3 speed
inline 6 258
everything stock
I have a CJ5 1976 AMC 232 i6 standard.. I am thinking of upg to a v8 are there any crate engines that are a match fit? Also will I need a new tranny?
 
Did a 360 AMC swap in my 3 spd AMC 232 i6 78 CJ7 . Used the bomb-proof motor mounts and with the exception of re-routing fuel line, fairly simple. AMC V8's have same bolt pattern on bellhousing as 6 cylinders.
 
The AMC V8 is the easiest swap you can get. The passenger side motor mount needs to be relocated but if carful the original mount can be reused; the bell housing, clutch, and everything else remains the same. AMC 360s are easy to come by at the bone yards and many rebuilders have them on the shelf ready to ship. The only other caveat to remember is that the AMC engines are externally balanced so if the flywheel doesn’t come with the boneyard motor be sure to pick up the right one. Flywheels are not interchangeable between engine sizes.
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$40.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  20.0%
Back
Top Bottom