Build Thread 83 CJ7 its time to get it done

[gert]

OMG I’m an idiot it just occurred to me to check and see if she was in gear....... and she is [emoji37]


Sent from my iPhone using Tapatalk

 

[gert]

I shall not recommend bulltear products sorry


Sent from my iPhone using Tapatalk

 

[Belizean]

What happened ?

 

[gert]

Oil pump drive gear wouldn’t fit into distributor, had to open pump up remove it file it, timing is off can’t get distributor out of housing, pissed off gonna pull the whole cover and pump and go back to the old one and try to set TDC and then time distributor


Sent from my iPhone using Tapatalk

 

[Belizean]

Wow bummer.

 

[gert]

Taking a break from the motor, finishing some suspension projects






A wee bit taller


Sent from my iPhone using Tapatalk

 

[gert]

Got a little tow pig porn today. I added load leveler air bag kit on it and it took about 4 hours of swillin beer and eating cheap Chinese take out to get it done





Notice anything different about the license plate? I decided I would rather drill holes in state property than my nice chrome bumper


Sent from my iPhone using Tapatalk

 

[gert]

I even have really good parking brake on it now


Sent from my iPhone using Tapatalk

 

[Belizean]

I figured you would put it at 45 degrees mounted into the tailgate. Will the airbags give it some lift with the trailer behind ?

 

[gert]

Yep the leaves on the Ramcharger are fairly soft, once I get the trailer loaded on the back I can pump up the bags to restore a level ride height


Sent from my iPhone using Tapatalk

 

[gert]

Motor apart




Motor back together....... present self wants to go drink beer and watch tv and leave the finding TDC and cam break in to future Gert......


Sent from my iPhone using Tapatalk

 

[Belizean]

Don't stall out. But it is Sunday, go drink 2 and relax and get back to it after relaxing, maybe tomorrow

 

[gert]

And it still doesn’t start, I’m starting to suspect I missed something some how on the timing chain


Sent from my iPhone using Tapatalk

 

[gert]

Plot thickens..........


No compression on 3 different cylinders


Sent from my iPhone using Tapatalk

 

[gert]

I’m at my local watering hole not getting service and took a look at my timing chain picture and believe I found my issue



That chain is going to meet my 10 pound sledge hammer and then my cutting torch


Sent from my iPhone using Tapatalk

 

[Belizean]

(n)

 

[gert]

Cold air sent me this link and when I sober up I will look at it

https://cloyes.com/wp-content/uploads/2019/06/3-keyway-instructions-general.pdf


Sent from my iPhone using Tapatalk

 

[Masscj7]

Regardless of your current issues, you never cease to amaze in the volume of work you get done in short time frames. Keep getting after it as I continue to sit and wait on the painter...


Sent from my iPhone using Tapatalk

 

[coldair]

The key looks like it is on the bottom keyway. It need to be at the 2 o'clock position with the marks lined up like you have them.

 

[coldair]

Btw I didn't realize I sent you a link for the chevy and ford cloyes timing set.