Misc. AMC 20
shustring
Jeeper
- Posts
- 2
- Thanks
- 0
- Location
- Billings
- Vehicle(s)
- 1974 CJ 5 soon to be 360ci, 4 spd. , 1979 FSJ Cherokee, 2021 Rubicon, 1983 CJ7 258 Auto.
So the hub on my AMC20 drivers side spun I put a new axle and hub in per the instructions. I tightened the hub down to get the 1 5/16" from the end of the shaft to set the splines and torqued the nut to 250 FT LBS. now with the wheel and tire on it sticks out about an inch and a half more than the passenger side. Has anyone else run into this?
