AMC rebuild manual
jeepboy45
Old Time Jeeper
- Posts
- 1,239
- Thanks
- 2
- Location
- Altamonte Springs, Florida
- Vehicle(s)
- 1979 CJ-7, Newly rebuilt AMC 360!, fully rebuilt GM TH400, Quadra-trac TC w/Milemarker 2x4 conversion, AMC mod 20 rear w/1 piece Moser axleshafts, mod 30 front w/tie rod flip and castor correction shims, 4 in lift, Centech complete wiring harness, dual electric fans on 3 core aluminum radiator, tilt steering wheel, 20 gal poly gas tank, new J20 steering box, MSD 6A ignition combined with TeamRush distributor mods
Hey everybody.
I'm picking up my 360 from the machine shop today.
I have the 1979 technical service manual, and it has a fairly detailed engine section. I rebuild a AMC 304 using that, way back when I was 19.. (too long ago)
However, I am looking for a GOOD AMC rebuild book....something that might have additional tips other than those from the factory..
I heard about "BJ's rebuild" book, but cant find it.
Any suggestions?
thanks very much
I'm picking up my 360 from the machine shop today.
I have the 1979 technical service manual, and it has a fairly detailed engine section. I rebuild a AMC 304 using that, way back when I was 19.. (too long ago)
However, I am looking for a GOOD AMC rebuild book....something that might have additional tips other than those from the factory..
I heard about "BJ's rebuild" book, but cant find it.
Any suggestions?
thanks very much