Brake related Power Booster vacuum hose pic

Brake related Power Booster vacuum hose pic

ColeTrickle

Jeeper
Posts
162
Thanks
0
Location
Fort Worth
Vehicle(s)
'83 CJ7 Laredo 258/T5/D300
'80 J10 Honcho 360/727/NP208,
'79 J10 Honcho 360/TH400/QT,
'75 J20 "Workhorse" 360/T18/D20
I'm swapping from manual brakes to power booster assisted and don't know where the vaccum hose is supposed to go.

Could, would anyone be willing to take a pic of where the stock location is on the manifold?

Theres a few possibilities on the manifold, I just want it to go where the AMC engineers designed it to be...:rolleyes:

Thanks abunch!:chug:
 
I don't have a better pic uploaded but you can see where it connects on mine. If you look at 3:00 in the pic, the short pipe that goes off screen, right below the gold cto valve is where my brake booster connected. (note the intake is upside down)
img2116iz.jpg
 
Thanks so much PaRenegade!

I'm not near the jeep at the moment but this will give me an idea on where to look on mine.

If I have any other questions, I'll post back here.

Thanks again.:D

BTW, that valve cover and head is purty!!!
 
connected mine above where the EGR valve was
CIMG2748.jpg
 
Thanks a bunch, rlitavecz!;)
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a donation.

Help support Jeep-CJ.com by making a donation.
Goal
$200.00
Earned
$10.00
This donation drive ends in
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks