Cj7 cross member
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.To dismiss this noticeclick the top right X.
Cj7 cross member
- Thread starter mikeralph
- Start date Start date:
- Last post Last post:
CJ007
Old Time Jeeper
- Posts
- 1,351
- Media
- 75
- Thanks
- 0
- Location
- Peoria, AZ
- Vehicle(s)
- 83' CJ7-35's, granny T18, clocked, locked, 456s, D30 20 trussed- stitched-heim traction-1 piece shafts, CV dshaft, quick discos, xtended shock mounts, SOA, revolvers rear, braided lines, herculined, hand throttle, AMC saddle bags, rebuilt 258, D300.
I would say it may be easier to fab. I think you are referring to the piece that runs across, in front of the tank and the bolts go through to hold tank skid plate on. If so, it should be easy to pick up a piece of angle iron or steel, drill holes in and weld it up. If you don't weld, take it to a cheap muffler shop and give them $5-20.
mikeralph
Jeeper
I agree with you on making my own ,I have looked everywhere and I guess they do not make replacements.I will borrow brother inlaws mig welder and give it a go.
thanks
thanks
sertshark
Jeeper
JC Whitney and Essentials has them. I've considered purchasing one myslelf. You can get pre-drilled ones, or ones without holes. They are pretty inexpensive.