D300 Input Shaft Housing Bolts

[ThisGuyUKnow]

I am going with an NV3550 and to do so requires I use a longer input shaft from Advanced Adapters. In the process of removing the aluminum retainer housing, two of the allen head bolts on the housing stripped on me. I am fairly certain I can get them out but I will need to replace them and I cannot find a PN. I looked at quadratec and their blow out of the TC shows the bolt I need but has no PN for it.

 

[Lumpy Grits]

I have had good luck with these.
helicoil,helicoil insert,helicoil inserts,helicoil kit, helicoil tap, heli-coil, helicoil tools

LG

 

[ThisGuyUKnow]

I have had good luck with these.
helicoil,helicoil insert,helicoil inserts,helicoil kit, helicoil tap, heli-coil, helicoil tools

LG

Lumpy. The allen head on the bolt stripped not the threaded part of the case. I am pretty certain I can remove them without damaging the threading but i will need new bolts to replace them.

 

[IOPort51]

Allen head bolts should be available at your local Home despot.

unless, of course, they are metric. I would look to McMaster Carr for replacements.

 

[Lumpy Grits]

Well, when ones sayz 'stripped' one thinkz threads-
Sounds like now-your say'n the wrench fitting rounded out. 'RITE'
Many times, this is caused buy low-quality allen wrenches as they are 'soft'. They round off easily.
BTW-Torx wrenches will fit allen head--
LG