Dana 20 Linkage

[DLane]

anyone know where i can find a Dana 20 linkage like this one?

Transfer Case
any site i seem to find is no longer selling them including the one above.
or im also willing to fabricate/ modify my existing sloppy one but not sure on a good way of doing that.

 

[CJ]

Keep a look out on E-Bay, here is a link to an old ad that has expired. -->> Jeep CJ Dana 20 Transfercase Shifter Linkage | eBay

You may also want to make your own, that is what I did (basicly the same as the Ebay link), using two heim joints.

 

[CJ]

Forgot to ad there is always Twin Sticking it...

 

[DLane]

I'd like to twin stick it but I won't be the only one driving it and don't want to risk the possible damage of someone having it in different gears than it should be. Might see what I can find for heim joints. Any chance you have a picture of your setup?

 

[tarry99]

anyone know where i can find a dana 20 linkage like this one?

Transfer Case
any site i seem to find is no longer selling them including the one above.
or im also willing to fabricate/ modify my existing sloppy one but not sure on a good way of doing that.

Build one...............Graniger or McMaster Carr has the Ball socket type ends in differnt sizes, looks like two female ends with a piece of threaded stock in the middle for adjustment......those ends are standard throughout the Industrial supply industry............or as CJ mentioned twin stick it.

 

[CJ]

I don't have any pics of the one I build (sold my linkage when I went Twin Stick) but it looked like the Ebay one, as tarry99 suggested I purchased my ball socket joints from McMasters.

Here is the Ebay pic.

 

[DLane]

Looks simple enough to build. I'll See what kind of parts I can find tomorrow! The last piece i need to finish up my Transfer Case !

 

[JR74CJ5]

I should still have the one around that i bought from that e-bay seller.

Let me know if you need some measurements etc. I twin sticked mine, so it should be out in my spare parts section in my garage.


~ Jr

 

[73CJ]

Lots of places have heim joints. I'm thing it's a 3/8-24 stud and body threads.

 

[DLane]

Yeah think I've found what I need. Just need to measure when I get home and get them ordered.