Dana 200 transfer case cant find 2 high

[gcampbell]

Looking for the shift rod positions for 2 high, I find 4 high all the way forward
but when a pull to what should be 2 high I have nothing then pull to neutral and then down to 4 low which works as does 4 high but nothing for 2 high any thoughts?

 

[hole]

Just checking first. Your profile says 84 and has a T-150 and Dana 20 ? The T-150 and Dana 20 are not stock to an 84, unless its maybe a 74? Anyways, just making sure exactly what set-up you have so folks can give better advice.

 

[gcampbell]

Yea thanks for the clarification, sometime in the past the previous owner swapped out the T-14 and for the T-150 .
Still looking for the shift rod locations for 2 high.

 

[hole]

A T-14 never came factory behind an 84 either. If you indeed have an 84, PO swapped in the T-150 /Dana 20 and likely fubared the Transfer Case linkage assembly along the way. Just a guess.