Electric fuel pump for 304 v8
radman
Jeeper
- Posts
- 139
- Thanks
- 0
- Location
- South Dakota
- Vehicle(s)
- 79 CJ5, 304, T150, Dana 20, Corp 20, Superior one piece axles
2012 JK Rubicon 2 door
-
To celebrate the 4th of July, starting today (07/01/2025) all User Upgrades will be reduced by 10% (thru 07/08/2025) To use this special coupon use the code 2025-4th-10percent at check out. If you are already a supporter your existing package will be extended.
Thank you for your support!
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Electric fuel pump for 304 v8
- Thread starter radman
- Start date Start date:
- Last post Last post:
mylittlecj5
RIP Mike, we'll all miss you
what about the fuel stored in the tank? if you plan on using fuel stablizer in there, you might as well run the engine until the stabilizer hits the carb to keep the seals from drying out while its stored.
radman
Jeeper
- Posts
- 139
- Thanks
- 0
- Location
- South Dakota
- Vehicle(s)
- 79 CJ5, 304, T150, Dana 20, Corp 20, Superior one piece axles
2012 JK Rubicon 2 door
great idea... any ideas on best brand of electric pump??
what about fuel pressure issues as well... since jeeps drink
gasoline by the barrel, do i need to get a higher volume
pump (or what)
radman
what about fuel pressure issues as well... since jeeps drink
gasoline by the barrel, do i need to get a higher volume
pump (or what)
radman
LongHorn
Always Off-Roading Jeeper
- Posts
- 5,315
- Media
- 49
- Thanks
- 1
- Location
- Washington Co.,Texas
- Vehicle(s)
- 83'CJ-8 Scrambler Slightly Modified;),48'CJ2A, 54'CJ3B 67'Jeep M-725, 88'YJeep Wrangler Slightly Modified;)
Most carbs should run in the 5.5- 7.5 PSI range.